[Designed, manufactured and shipped from California]
For quotes on large orders and lead times, please send your inquiry to email@example.com or call us at 619-503-1003.
mRos' Quad Zero Carrier board is the most feature-rich carrier board in the Control Zero ecosystem in a ultra-light and compact form factor.
It packs a 4-in-1 ESC which can operate with up to 4S batteries, a hall-effect current sensor, a 3A 5V voltage regulator and even a ToF sensor to avoid hard landings from baro drift - hence the weird stem at the front. The regular GPS, and Telemetry ports are broken out in JST-SH connectors to preserve the light profile of the board, but also there are some pads in the board which break out more pins to provide extra connectivity such as a CAN port and PWM 5-8.
It has four removable tabs with screw holes in case any particular customer's application requires hard mounting, for our Quad Zero they are teared apart and it is mounted using the new damping material we found out during development.
If you need shipping ETA or
special requests, please email us at firstname.lastname@example.org.NOTE: Autopilot, frame, and motors NOT Included.Features/Technical Specs:
|Item:||Quad Zero Carrier Board|
|Width:||55 mm (44mm w/o tabs)|
|Length:||98mm (72.7 mm w/o stem)|
|Tabs screw pattern:||50 mm x 43 mm (Rev D)|
|Weight:||7.82 g [0.01719 lbs]|
|ESC:||4x13A 2-4S BLHeli_S|
|Ports with connectors:||microUSB, 3xJST-SH (GPS, TELEM1, TELEM2), BT2.0 pigtail|
|Extra Pads:||I2C3, CAN1, RC, RSSI, PWM5-8, PWR OUT|
|Sensors:||- VL53L1X ToF Sensor|
- Power Zero Hall-effect current sensor
- Power Zero voltage sensor
|Extras:||- Power source indication LED|
- FC power indication LED