Your cart is empty.
PixRacer Pro
$349.90
Four years after the original Pixracer was designed and proven, we recognized the need to bring the design to the forefront of open-source flight controllers. With the Pixracer Pro, we maintained everything that the UAV community loved about the original Pixracer and improved every deficiency that was known. The resulting model is destined to become the new go-to flight controller for developers and will provide a rock solid foundation for commercial and industrial systems.
Please visit our docs site for more information.
Please visit our docs site for more information.
Main Processor: 32-bit STM32H743IIK6 Cortex M7 RISC core with FPU 460 MHz
IO Processor: No
RAM: 1024 KB RAM
Flash: 2 MB FRAM
Crypto / Hash Processor: No
Accelerometers / Gyros / Mags: Yes
Sensors:
Invensense/TDK ICM-20602 (6DOF)
Invensense/TDK ICM-20948 (9DOF)
Sensors - Dampened: Bosch BMI085 (6DOF) (internally vibration dampened)
Internal Magnetometer: AK09916 inside ICM-20948
Barometric Pressure Sensor: DPS310
Interfaces and Protocols: 6x UART (serial ports) [2x with HW flow control,1x FRSky Telemetry (D or X types), 2x General Purpose & 1x GPS+I2C
1x PPM sum input signal
IO Processor: No
RAM: 1024 KB RAM
Flash: 2 MB FRAM
Crypto / Hash Processor: No
Accelerometers / Gyros / Mags: Yes
Sensors:
Invensense/TDK ICM-20602 (6DOF)
Invensense/TDK ICM-20948 (9DOF)
Sensors - Dampened: Bosch BMI085 (6DOF) (internally vibration dampened)
Internal Magnetometer: AK09916 inside ICM-20948
Barometric Pressure Sensor: DPS310
Interfaces and Protocols: 6x UART (serial ports) [2x with HW flow control,1x FRSky Telemetry (D or X types), 2x General Purpose & 1x GPS+I2C
1x PPM sum input signal
8x PWM outputs (all DShot capable)
1x RSSI (PWM or voltage) input
1x I2C
1x SPI
2x CAN
1x JTAG (TC2030 Connector)
3x Ultra low noise LDO voltage regulator
1x RSSI (PWM or voltage) input
1x I2C
1x SPI
2x CAN
1x JTAG (TC2030 Connector)
3x Ultra low noise LDO voltage regulator
Supported RC input protocols:
Spektrum DSM / DSM2 / DSM-X® Satellite compatible input and binding.
Futaba S.BUS® & S.BUS2® compatible input.
FRSky Telemetry port output.
Graupner SUMD.Yuneec ST24.
Spektrum DSM / DSM2 / DSM-X® Satellite compatible input and binding.
Futaba S.BUS® & S.BUS2® compatible input.
FRSky Telemetry port output.
Graupner SUMD.Yuneec ST24.
Connectors:
-JST GH
-External USB-C
Pin Headers: Yes - 8 Servo * pins are not soldered
Conformal Coating: No
Extended Testing and Burn In: No
Custom Carrier Board Support: No
LED: Yes (Tricolor)
Dimensions: Width: 36mm (1.42”) / Length: 36mm (1.42”)
Weight: 9.09g (.31 oz) w/o pins
Mounting Holes: 4mm holes at 30.5mm spacing, Silicone grommets for m3 screws
Protector Case: No
-JST GH
-External USB-C
Pin Headers: Yes - 8 Servo * pins are not soldered
Conformal Coating: No
Extended Testing and Burn In: No
Custom Carrier Board Support: No
LED: Yes (Tricolor)
Dimensions: Width: 36mm (1.42”) / Length: 36mm (1.42”)
Weight: 9.09g (.31 oz) w/o pins
Mounting Holes: 4mm holes at 30.5mm spacing, Silicone grommets for m3 screws
Protector Case: No
Typical Platforms:
-Multirotor
-Rover
-Fixed-Wing
-Boats
-Submarines
-VTOL
-Automatic Tractors
-Others
Compatibility:
-Rover
-Fixed-Wing
-Boats
-Submarines
-VTOL
-Automatic Tractors
-Others
Compatibility:
Ardupilot, PX4
More Information:
Terms & Policies:
The measurements below are shipping related:
Current Stock:
SKU:
M10064D
Availability
Usually Ships in 24 Hours
Width:
6.00
(in)
Height:
4.00
(in)
Depth:
1.00
(in)
Harmonized Tariff Code::
9014.20.4000
ECCN::
EAR99