$410.90
I acknowledge that I have read the information below and I agree with that *
Availability: Usually Ships in 3 to 4 Weeks.

The ZED-F9 GPS is the most precise GPS available, capable of achieving up to 2 cm precision under the right conditions. This high-performance device can simultaneously use all major constellations, including the more precise L2 band.

We believe this is the best GPS in the market that you can possibly buy at this price point.

Built on over 10 years of flight controller design and development experience.

 

View Full Documentation
⚠ u-blox Code of Conduct Notice: In alignment with the u-blox Code of Conduct, we ask that you confirm products containing u-blox modules will not be used for anything related to weapons before adding to cart. Please accept the consent form prior to purchase.

Key Features

  • u-blox ZED-F9 RTK GNSS receiver — L1/L2 dual-frequency
  • RTK ready for centimeter-level precision (up to 2 cm under ideal conditions)
  • Proprietary RF stage for high gain and noise immunity
  • Eliminates signal loss from u.Fl/SMA connectors and long antenna cables
  • 70 × 70 mm RF ground plane for maximum signal performance
  • Compatible with ArduPilot and PX4 flight stacks

Technical Specifications

GNSS Performance / Sensors

GNSS Module ZED-F9P-0x-B Magnetometer No
Constellations GPS (L1/L2)
GLONASS (L1/L2)
Galileo
BeiDou
Barometer No
Software Compatibility ArduPilot, PX4    

Interfaces / Electrical Power & Environment

Ports with Connectors 2 × JST-GH (GPS, UART2)
1 × USB-C
Operating Temperature –20 to 80°C
Ports in Pads PPS/GND signal pads LED Yes
Peripherals XPC240 series module GNSS Bands L1, L2
RTK Capable Yes CAN Capable No
External Antenna No    

Mechanical

Dimensions (L × W × H) 81.2 × 70 × 12.7 mm (3.20 × 2.76 × 0.50 in) Weight 54.5 g (1.92 oz)
Screw Pattern 75.5 × 63.9 mm (2.97 × 2.52 in) Screw Size M3
Ground Plane 70 × 70 mm (2.76 × 2.76 in) Material FR4 PCB
Country of Origin USA    

What's Included

  • 1 × 3DR ZED-F9 GPS Module (M10020)
  • 2 × MRC0206 — 6-Pin JST-GH to 6-Pin JST-GH Cable (150 mm)
  • 1 × USB-C Cable (600 mm)

Typical Platforms

Multirotor Fixed-Wing VTOL Rover
Others Any ArduPilot / PX4 compatible platform    

Additional Information

SKU M10020 ECCN EAR99
Material FR4 PCB Tariff Code 9014.20.4000
Country of Origin USA